Looking for one-to-one help? See our neet physics home tutor in gurgaon page.
Preparing for all three NEET subjects? See NEET coaching and home tuition in Gurgaon.
Electrostatics for NEET is NMC syllabus Unit 11, taught in the first two chapters of NCERT Class 12 Physics: Electric Charges and Fields, and Electrostatic Potential and Capacitance. Current electricity is Unit 12, NCERT Class 12 Chapter 3. The two are best learnt as one chain, from charge to field to potential to current. NTA does not publish how many questions come from either unit, so this guide gives no counts. It does give each key formula with the conditions under which it holds, because a formula used outside its conditions is the commonest way to lose marks here.
This guide belongs to our series for families working with a one-to-one NEET Physics tutor in Gurgaon. It maps both units to NCERT sections, flags where the syllabus goes beyond the current textbook, sets out the formulas with their conditions, explains the two ideas that decide most capacitor and circuit questions, and works through eight NEET-style numericals. The syllabus and NCERT section names (Reprint 2026–27) were checked against the official PDFs on 22 November 2026.
| Question | Answer | Source |
|---|---|---|
| Which NEET units are these? | Unit 11 Electrostatics and Unit 12 Current Electricity, out of 20 physics units | NMC Syllabus for NEET (UG) 2026 |
| Which NCERT chapters? | Class 12 Physics Part I: Chapter 1 Electric Charges and Fields, Chapter 2 Electrostatic Potential and Capacitance, Chapter 3 Current Electricity | NCERT contents pages, Reprint 2026–27 |
| Which Unit 20 experiments use them? | Resistivity of a wire using a metre bridge; resistance of a wire using Ohm's law | NMC syllabus, Unit 20 |
| How many questions come from these units? | Not published. The bulletin gives 45 Physics questions and no split by unit. | NEET (UG) 2026 Information Bulletin |
| How is the paper marked? | +4 correct, −1 wrong, 0 unanswered; 180 questions in 180 minutes; pen and paper; calculators not allowed | NEET (UG) 2026 Information Bulletin |
| Is there a 2027 syllabus? | Not when we checked on 22 November 2026. Use the 2026 list until NMC publishes a new one. | neet.nta.nic.in |
Sources: the NMC's Syllabus for NEET (UG) 2026 and the NEET (UG) 2026 Information Bulletin. With no calculator, these units reward students who handle powers of ten and ratios confidently.
Read NCERT with this table open beside it. Each row pairs a line of the NMC syllabus with the NCERT Class 12 section that teaches it.
| What the NMC syllabus names | Where NCERT teaches it |
|---|---|
| Unit 11: Electrostatics | |
| Charges, conservation of charge, conductors and insulators | Chapter 1, Electric Charges and Fields: sections 1.2 to 1.4 |
| Coulomb's law; superposition; continuous charge distribution; field of a point charge; field lines | Sections 1.5 to 1.8 and 1.12 |
| Dipole, its field, and torque in a uniform field | Sections 1.10 and 1.11 |
| Flux; Gauss's law for an infinite line, an infinite plane sheet and a thin spherical shell | Sections 1.9, 1.13 and 1.14 |
| Potential of a point charge, a dipole and a system of charges; equipotentials; potential energy of two charges and of a dipole in a field | Chapter 2, Electrostatic Potential and Capacitance: sections 2.2 to 2.8 |
| Conductors; dielectrics and polarisation | Sections 2.9 and 2.10 |
| Capacitance; series and parallel; parallel plate capacitor with and without a dielectric; energy stored | Sections 2.11 to 2.15 |
| Unit 12: Current Electricity | |
| Current; drift velocity and mobility; Ohm's law; ohmic and non-ohmic V-I characteristics | Chapter 3, Current Electricity: sections 3.2 to 3.6 (mobility is 3.5.1) |
| Resistivity and conductivity; temperature dependence; electrical energy and power | Sections 3.7 to 3.9 |
| Emf, internal resistance and terminal voltage; cells in series and parallel | Sections 3.10 and 3.11 |
| Kirchhoff's laws; Wheatstone bridge | Sections 3.12 and 3.13 |
| Series and parallel resistors; metre bridge | No section of their own (see the next part) |
The map shows why the order matters. Chapter 2 starts from the work done against the field of Chapter 1, and Chapter 3 starts from the potential difference of Chapter 2. A student weak on potential will find capacitors and circuits harder than they should be.
Unit 11 matches the current (rationalised) NCERT book closely. The differences we found on 22 November 2026 are all in Unit 12.
| Item | NMC syllabus | Current NCERT book | What to do |
|---|---|---|---|
| Metre bridge | Named in Unit 12; its use for resistivity is experiment 10 of Unit 20 | One sentence after the Wheatstone bridge, with no working | Learn the balance condition, end errors and why the balance point is best near the middle, from the lab manual or a reference book |
| Series and parallel resistors | Named in Unit 12 | No section in the contents; the rules are used in examples and exercises | Learn both rules, and R1R2/(R1 + R2) for two in parallel, before Kirchhoff's laws |
| Potentiometer | Not named in Unit 12 or Unit 20 | No section | Not needed as a topic for NEET (UG) 2026; recheck when the 2027 syllabus appears |
Older reference books often have long potentiometer sections. Under the 2026 syllabus they are optional; spend that time on Kirchhoff's laws and capacitors, which the syllabus does name. Experiment 11 of Unit 20 (resistance by Ohm's law) rests on sections 3.4 and 3.6: know the circuit, the V-I graph and what its slope gives.
The full list is in our NEET physics formula sheet. This table does a different job: for each key result it states when the formula holds and how it is most often misused, because NEET options are built around those misuses. Here k = 1/(4πε0) ≈ 9 × 109 N m2 C−2.
| Result | Holds when | Common misuse |
|---|---|---|
| F = kq1q2/r2 | Point charges at rest, or spherical charges seen from outside. In a medium filling the space, divide by K. | Signs dropped when adding forces from several charges |
| E = kq/r2; V = kq/r | Point charge, or outside a uniform sphere or shell; V is zero at infinity | Adding fields as numbers, or potentials as vectors |
| E = −dV/dr; E = V/d | The second form only in a uniform field, with d along the field | Using E = V/d near a point charge |
| Dipole: Eaxial = 2kp/r3, Eequatorial = kp/r3 | r much larger than the charge separation | Used close to the charges |
| τ = pE sinθ; U = −pE cosθ | Uniform field, where the net force is zero | Forgetting that a non-uniform field also gives a net force |
| Gauss's law Φ = qenclosed/ε0 | Always true for a closed surface; gives E only when symmetry makes E constant over it | Counting charges outside the surface |
| Line λ/(2πε0r); sheet σ/(2ε0) | Very long line; very large thin sheet (field independent of distance) | Using σ/(2ε0) just outside a conductor, where it is σ/ε0 |
| Thin shell: kQ/r2 outside, 0 inside | Uniform charge on a thin spherical shell | Taking the potential inside as zero; it is constant, kQ/R |
| U = kq1q2/r | Zero at infinite separation; for several charges, one term per pair | Counting pairs twice, or missing one |
| C = ε0A/d; filled with dielectric, Kε0A/d | Plates much larger than the gap, so edge effects are ignored | Using K when the slab fills only part of the gap |
| Series 1/C = Σ1/Ci; parallel C = ΣCi | Series: same charge (initially uncharged). Parallel: same potential difference. | Combining capacitors like resistors |
| U = ½CV2 = Q2/(2C) = ½QV | Any capacitor; use the form whose quantity stays fixed | Using the old V after the battery is disconnected |
Most electrostatics questions test one of five ideas. Learn them as ideas, and the formulas become easy to rebuild.
Before any capacitor question in which something changes, ask whether the battery is still connected. If it is, V stays fixed. If the capacitor was charged and then disconnected, Q stays fixed. Everything else follows.
| Change | Quantity | Battery connected (V fixed) | Battery disconnected (Q fixed) |
|---|---|---|---|
| Dielectric K inserted to fill the gap | C | Becomes KC | Becomes KC |
| Q and V | V same; Q becomes KQ | Q same; V becomes V/K | |
| Field between the plates | Same (V/d unchanged) | Becomes E/K | |
| Stored energy | K times larger | 1/K of the original | |
| Plate separation doubled | C | Halves | Halves |
| Q and V | V same; Q halves | Q same; V doubles | |
| Field between the plates | Halves | Same (it depends only on Q/A) | |
| Stored energy | Halves | Doubles (the work done pulling the plates apart is stored) |
The energy rows follow from using ½CV2 when V is fixed and Q2/(2C) when Q is fixed. One more case is common: when a charged capacitor is joined to an uncharged one, charge is shared until both are at the same potential, and some energy is always lost as heat (numerical 5).
From our tutors: in capacitor questions, the most common error we see is in the first line, not the physics. Students start calculating before deciding whether V or Q is fixed, then use whichever energy formula they remember first. We ask them to write "V fixed" or "Q fixed" at the top of every capacitor problem before anything else. It takes two seconds, and in our experience it removes most capacitor mistakes within a couple of weeks.
| Result | Holds when | Common misuse |
|---|---|---|
| I = neAvd; vd = eEτ/m; μ = vd/E | Uniform conductor; n is free electrons per unit volume | Confusing the tiny drift speed with the speed of the signal |
| V = IR | Ohmic conductors at constant temperature (straight V-I line through the origin) | Applied to a diode, which is non-ohmic |
| R = ρl/A | Uniform wire; ρ depends on material and temperature, not shape | Keeping A fixed when a wire is stretched |
| RT = R0[1 + α(T − T0)] | Limited temperature range; α positive for metals. Semiconductors' resistivity falls as temperature rises. | Assuming every resistance rises with temperature |
| Terminal voltage V = E − Ir | Cell supplying current; while it is being charged, V = E + Ir | Using E as the voltage across the external resistor |
| P = VI = I2R = V2/R | All equal for a resistor; use I2R when current is common (series), V2/R when voltage is common (parallel) | "More resistance, more power" without saying what is fixed |
| Maximum power to external R at R = r: E2/(4r) | Fixed E and r, R varied | Thinking this is the most efficient case; only half the power reaches R |
| Kirchhoff: junction ΣI = 0; loop Σ(potential changes) = 0 | Steady currents; charge and energy conservation | Inconsistent signs round a loop |
| Balanced bridge P/Q = R/S | No galvanometer current, whatever its resistance or the battery emf | Including the galvanometer arm in the equivalent resistance |
Series and parallel reduction solves most NEET circuits; Kirchhoff's laws solve every one. Use this order so the quick method comes first.
The general routine for any numerical, including the mental arithmetic NEET needs without a calculator, is in our guide to NEET physics numericals with worked examples.
Does your child freeze at capacitor or circuit questions? Book a free NEET Physics demo class at home in Gurgaon or live online. The tutor will work through a few questions with your child and show exactly which step goes wrong.
Book a Free NEET Physics Demo +91 92204 75088These questions were written by our team in NEET style; they are not previous-year questions. Each states its conditions, and every answer was checked by hand and again with a short computer script. Take k = 9 × 109 N m2 C−2 and e = 1.6 × 10−19 C.
Point charges of +4 μC and +1 μC are fixed 30 cm apart in air. The electric field is zero at a point: (a) 10 cm from the +4 μC charge (b) 20 cm from the +4 μC charge, between them (c) at the midpoint (d) 30 cm beyond the +1 μC charge
Answer: (b). For like charges, the fields oppose each other only between them, so the null point is between them, nearer the smaller charge. At x from the +4 μC charge: 4/x2 = 1/(0.3 − x)2, so 2/x = 1/(0.3 − x) and x = 0.2 m. Trap: (d) is the answer for +4 μC and −1 μC, where the null point lies outside, beyond the smaller charge. The potential at the null point is not zero: V = 9 × 109(4 × 10−6/0.2 + 1 × 10−6/0.1) = 2.7 × 105 V.
A charge of 8.85 μC is at the centre of a cube. Taking ε0 = 8.85 × 10−12 C2 N−1 m−2, the flux through one face is about: (a) 1.0 × 106 N m2/C (b) 1.7 × 105 N m2/C (c) 1.25 × 105 N m2/C (d) zero
Answer: (b). Total flux = q/ε0 = 8.85 × 10−6/8.85 × 10−12 = 1.0 × 106 N m2/C. By symmetry, each of the six faces gets one-sixth: about 1.7 × 105. Trap: (a) is the total, and (c) divides by 8, which belongs to a charge at a corner of the cube. The cube's size does not matter.
Three charges of +1 μC each are placed at the corners of an equilateral triangle of side 30 cm. The work needed to assemble them from infinity is: (a) 0.03 J (b) 0.09 J (c) 0.18 J (d) 0.045 J
Answer: (b) 0.09 J. There are three pairs, each with U = kq2/a = 9 × 109 × 10−12/0.3 = 0.03 J, so the total is 0.09 J, equal to the work needed if the charges are brought in slowly. Trap: (a) counts one pair and (c) counts each pair twice.
A dipole of moment 2 × 10−8 C m is in a uniform field of 5 × 104 N/C. Find (i) the torque at 30° to the field, and (ii) the work needed to turn it from along the field to the opposite direction.
Answer: (i) 5 × 10−4 N m; (ii) 2 × 10−3 J. pE = 10−3. (i) τ = pE sin 30° = 5 × 10−4 N m. (ii) W = pE(cos 0° − cos 180°) = 2pE = 2 × 10−3 J. Condition: a uniform field, so only the torque acts. Trap: sinθ in the work formula. Torque uses sinθ, energy uses cosθ.
A 3 μF capacitor charged to 120 V is disconnected and then joined across an uncharged 6 μF capacitor. Find the common potential and the energy lost.
Answer: 40 V; 14.4 mJ. Charge is conserved: Q = 360 μC, so V = 360/9 = 40 V. Energy before = ½ × 3 × 10−6 × 1202 = 21.6 mJ; after = ½ × 9 × 10−6 × 402 = 7.2 mJ. The 14.4 mJ difference becomes heat in the wires. Check: C1C2V2/[2(C1 + C2)] = (18/18) × 14,400 μJ. Trap: assuming energy is conserved. The loss does not depend on the wires' resistance.
A current of 3.2 A flows in a copper wire of cross-section 2 mm2, with 8 × 1028 free electrons per cubic metre. The drift velocity is: (a) 1.25 × 10−4 m/s (b) 1.25 × 10−7 m/s (c) 2.5 × 10−4 m/s (d) 1.25 m/s
Answer: (a). 2 mm2 = 2 × 10−6 m2. vd = I/(neA) = 3.2/(8 × 1028 × 1.6 × 10−19 × 2 × 10−6) = 3.2/(2.56 × 104) = 1.25 × 10−4 m/s. Trap: (b) converts mm2 as if it were mm, and (c) drops the 2 in the area. A lamp still lights almost at once, because the field that drives the drift is set up through the circuit almost instantly.
Junctions A and B are joined by three branches: (1) a 10 V cell with 2 Ω; (2) a 4 V cell with 2 Ω; (3) a 4 Ω resistor. Both cells have their positive terminals towards A and negligible internal resistance. Find the current in the 4 Ω resistor and through the 4 V cell.
Answer: 1.4 A; 0.8 A into the positive terminal of the 4 V cell. Take B as 0 V and A as V. Junction rule at A: (10 − V)/2 + (4 − V)/2 = V/4, so 28 − 4V = V and V = 5.6 V. Branch 3: 5.6/4 = 1.4 A. Branch 1: (10 − 5.6)/2 = 2.2 A. Branch 2: (4 − 5.6)/2 = −0.8 A, so 0.8 A flows into the 4 V cell's positive terminal and it is being charged. Check: 2.2 = 1.4 + 0.8, and the loop through branches 1 and 3 gives 10 − 4.4 − 5.6 = 0. Trap: assuming every cell must be discharging.
A bridge has P = 2 Ω and Q = 4 Ω on one side, R = 3 Ω and S = 6 Ω on the other, and a 5 Ω galvanometer joining the midpoints. An ideal 9 V battery is connected across it. The battery current is: (a) 2.5 A (b) 1.5 A (c) 1.0 A (d) 3.0 A
Answer: (a) 2.5 A. P/Q = R/S = 0.5, so the bridge is balanced and the galvanometer arm can be removed. The two sides, 6 Ω and 9 Ω, are in parallel: Req = 54/15 = 3.6 Ω, and I = 9/3.6 = 2.5 A. Check: 1.5 A through P and Q plus 1.0 A through R and S. Trap: (b) and (c) are the currents in one side only.
| Mistake | Fix |
|---|---|
| Adding field magnitudes from several charges | Resolve into components; use symmetry |
| Assuming V = 0 wherever E = 0, or the reverse | Calculate field and potential separately |
| Forgetting the medium | In a medium filling the space, force and field fall by K |
| Not deciding whether V or Q is fixed | Write it first in every capacitor question |
| Ignoring internal resistance | I = E/(R + r); V = E − Ir |
| Stretched wire with A held fixed | At constant volume, n times the length gives n2 times the resistance |
| Sign errors in Kirchhoff loops | One rule for resistors and one for cells, written at the top of the page |
These units open Class 12 but rely on Class 11 tools. Before Chapter 1, revise vector addition and resolution. Before Chapter 2, revise work, potential energy and the work-energy theorem. For a charged particle crossing a field, revise projectile motion. Our guide to mechanics for NEET, from kinematics to gravitation covers each, with worked numericals.
Moving Charges and Magnetism comes next and depends on both units, so close the circuit gaps first. Cells, emf and conductance also return in Chemistry, in electrochemistry; our NEET chemistry formula sheet sets out the physical chemistry formulas, unit by unit, with their conditions.
From our tutors: many students tell us electrostatics is "too abstract". Looking closer, the difficulty is usually potential, not field. Students can find a field but cannot say what 100 V at a point means physically. We spend a lesson on one picture: potential as potential energy per unit charge, just like height in a gravitational field. Once that picture is in place, equipotentials, capacitors and even circuits tend to make more sense.
Ajay Vatsyayan, our founder, teaches NEET Physics himself, and other students work with a physics tutor from our Home Tutors Team. Lessons are one-to-one, at home across Gurgaon and Gurugram or live online elsewhere, and these units follow the method in this guide:
Male and female tutors from our Home Tutors Team are available, and Chemistry and Biology can be planned alongside Physics in one timetable.
NMC Unit 11, Electrostatics, covers NCERT Class 12 Chapter 1, Electric Charges and Fields, and Chapter 2, Electrostatic Potential and Capacitance. Current electricity is a separate unit, Unit 12, which is NCERT Chapter 3.
No official figure exists. The NEET (UG) 2026 Information Bulletin gives 45 Physics questions and no split by unit, so any count online is an estimate. Your own error count by unit, from full mock papers, is a better guide.
Coulomb's law; the field and potential of a point charge; E = −dV/dr; Gauss's law results for a line, a sheet and a shell; the dipole results; C = ε0A/d with and without a dielectric; the series and parallel rules; and the three forms of stored energy. Learn each with its condition, because that is what NEET options test.
No. It is not named in Unit 12 or in the Unit 20 experiments of the NMC Syllabus for NEET (UG) 2026, and the current NCERT book has no section on it. The metre bridge, by contrast, is named in both. Check again when the 2027 syllabus is published.
NCERT covers nearly all of Unit 12 and should be read line by line. The gaps are the metre bridge, which the book mentions in one sentence, and the series and parallel rules for resistors, which it uses without a section of their own. You also need more practice than NCERT gives on multi-loop circuits and internal resistance.
Yes. A one-to-one tutor can see the exact step where a solution goes wrong, such as a field added without components, the wrong energy formula or a sign slip in a loop, and fix that habit directly. Ajay Vatsyayan Classes teaches NEET Physics at home across Gurgaon (Gurugram) and online, with male and female tutors available.
Want electrostatics and circuits made clear before the Class 12 year gets busy? Book a free demo with Ajay Vatsyayan Classes, Saraswati kunj II, Wazirabad, Sector 52, Gurugram, Haryana 122003, with 12+ years of home tuition in Gurgaon. For help across all three subjects, see our NEET home tutors in Gurgaon for Biology, Chemistry and Physics.
Book a Free NEET Physics Demo +91 92204 75088