12+ Years of One-to-One Home Tuition in Gurgaon – Ajay Vatsyayan Classes JEE/NEET | CBSE, ICSE, IGCSE & IB | Verified Home Tutors in Gurgaon Expert Home Tutors for Maths, Science, English, Accounts in Gurgaon Home Tuition at Your Home or Live Online – Book a Free Demo Class Home Tutors Near You – Maths, Science, English & More 12+ Years of One-to-One Home Tuition in Gurgaon – Ajay Vatsyayan Classes JEE/NEET | CBSE, ICSE, IGCSE & IB | Verified Home Tutors in Gurgaon Expert Home Tutors for Maths, Science, English, Accounts in Gurgaon Home Tuition at Your Home or Live Online – Book a Free Demo Class Home Tutors Near You – Maths, Science, English & More
×

NEET Chemistry Guide

  1. Home
  2. NEET Coaching in Gurgaon
  3. NEET Chemistry Tutor in Gurgaon
  4. Physical chemistry for NEET
By Ajay Vatsyayan Classes Home Tutors Team Reviewed by Ajay Vatsyayan Last reviewed: 22 Nov 2026

Part of our NEET Chemistry guide

Looking for one-to-one help? See our neet chemistry tutor in gurgaon page.

Preparing for all three NEET subjects? See NEET coaching and home tuition in Gurgaon.

Physical Chemistry for NEET: Chapters, a No-Calculator Method and 12 Worked Numericals

Physical chemistry for NEET is Units 1 to 8 of the NMC's NEET (UG) 2026 chemistry syllabus: some basic concepts, atomic structure, chemical bonding, thermodynamics, solutions, equilibrium, redox and electrochemistry, and chemical kinetics. They map to nine NCERT chapters, six in Class 11 and three in Class 12. Solid state, states of matter and surface chemistry, which older chapter lists still show, have no unit of their own. Most of the marks in physical chemistry come from numericals done by hand, because calculators and log tables are not allowed in the exam hall.

This guide is part of our NEET Chemistry home tuition in Gurgaon series. It lists the physical chemistry chapters for NEET with the NCERT chapter for each, the topics that are no longer in the syllabus, a step method for numericals without a calculator, twelve worked examples across all eight units, the traps our Home Tutors Team sees most often, and a study order. Every syllabus fact was checked against the official documents on 22 November 2026, and every number in the examples was checked by hand and again with a short script.

Physical chemistry chapters for NEET: the eight units

The NMC's Syllabus for NEET (UG) 2026 puts eight units under the heading "Physical Chemistry". No 2027 syllabus had been published when we checked on 22 November 2026, so the 2026 list is the reference. The table maps each unit to the current NCERT chapter (reprint 2026–27) and says what kind of work it needs.

NMC unitNCERT chapterType of workRelations you will use most
1 Some basic concepts in chemistryClass 11, Unit 1Numerical; the base for every other unitn = m/M; molarity; empirical and molecular formula; limiting reagent
2 Atomic structureClass 11, Unit 2Mixed: Bohr-model numericals plus quantum numbers and orbitalsEn = −13.6 Z2/n2 eV; rn = 52.9 n2/Z pm; λ = h/mv; Δx·Δp ≥ h/4π
3 Chemical bonding and molecular structureClass 11, Unit 4Mostly conceptual: VSEPR shapes, hybridisation, bond order, dipole momentBond order = ½(Nb − Na); VSEPR electron-pair count
4 Chemical thermodynamicsClass 11, Unit 5Numerical and sign-based reasoningΔU = q + w; ΔH = ΔU + ΔngRT; ΔG = ΔH − TΔS; ΔG° = −2.303RT log K
5 SolutionsClass 12, Unit 1NumericalRaoult's law; ΔTb = iKbm; ΔTf = iKfm; π = iCRT
6 EquilibriumClass 11, Unit 6Numerical, the longest unitKp = Kc(RT)Δn; pH; Ka; Ksp; buffer pH
7 Redox reactions and electrochemistryClass 11, Unit 7 (redox) and Class 12, Unit 2 (electrochemistry)Balancing plus numericalsOxidation number; E°cell; Nernst equation; ΔG° = −nFE°; Λm; Kohlrausch's law
8 Chemical kineticsClass 12, Unit 3Numerical and graph readingRate law; zero- and first-order integrated forms and half-lives; Arrhenius equation

Two things stand out from the official wording. First, Unit 7 joins two NCERT chapters from different years, so a Class 11 student has only half of it. Second, the syllabus sets limits in places: collision theory in Unit 8 is "no derivation", while Unit 2 does ask for the derivation of the Bohr relations for the energy and radii of orbits. For the full topic wording of every unit, see our NEET chemistry paper pattern and units guide.

How many questions come from physical chemistry?

Nobody official says. The NEET (UG) 2026 Information Bulletin gives 45 chemistry questions worth 180 marks, marked +4 for a correct answer and −1 for a wrong one, but neither NTA nor NMC publishes a split by unit or by physical, inorganic and organic. Figures you see online are someone's count of past papers. Our NEET chemistry chapter-wise weightage guide explains what the official papers can and cannot tell you.

What is no longer in NEET physical chemistry

Many chapter lists and question banks still carry chapters that the 2026 syllabus does not name. Check any list against the NMC document before giving it time.

TopicPosition in the NMC 2026 syllabusPosition in the current NCERT books
Solid state (unit cells, packing, defects)No unitNo chapter: the Class 12 book now opens with Solutions
States of matter (gas laws, liquids)No unitNo chapter in Class 11 Part I, which runs from basic concepts to equilibrium
Surface chemistry (adsorption, catalysis, colloids)No unit; Unit 20 names only the preparation of lyophilic and lyophobic solsNo chapter
CorrosionNot named in Unit 7A short section in Class 12 Electrochemistry
Uncertainty in measurement and significant figuresNot named in Unit 1 (errors are in Physics Unit 1)Section 1.4 of Class 11 Unit 1

Do not throw away the ideal gas equation, though. pV = nRT is still needed in thermodynamics (pressure–volume work, ΔH = ΔU + ΔngRT) and in equilibrium (Kp = Kc(RT)Δn). It is the separate chapter on gases that has gone, not the equation. Similarly, Henry's law survives: the NMC places it in Unit 6 among physical equilibria.

A numerical method without a calculator

The NEET (UG) 2026 Information Bulletin lists calculators, slide rules and log tables among the items candidates may not carry into the hall. In physical chemistry that matters more than anywhere else, because pH, the Nernst equation, ΔG° and K, and first-order kinetics all use logarithms. Questions are usually set so that the numbers work out, but only if you simplify in symbols first and know a few values by heart.

StepWhat to doWhat it catches
1. Read and listWrite the data with units, and underline what is asked: "molality" or "molarity", "ΔU" or "ΔH", "per mole" or totalAnswering a different quantity from the one asked
2. Write the balanced equationFor stoichiometry, redox, equilibrium and Nernst questions, balance first and note the electrons transferred (n) and ΔngWrong mole ratios, wrong n, wrong Δn
3. Pick the relation and check its conditionName it: Raoult, Nernst, first-order law. Check the condition: dilute solution, 298 K, gases only in Δng, complete or partial dissociationFormulas used where they do not hold
4. Fix the unitsJ or kJ; K, never °C; L or mL; mol kg−1 or mol L−1; choose the value of R that matchesFactor-of-1000 errors
5. Solve in symbols, then substitute onceRearrange first; look for ratios in which constants cancel; write numbers in powers of tenLong arithmetic and early rounding
6. Check against the optionsSign, order of magnitude and a sense check: pH of an acid below 7, ΔG negative for a spontaneous change, a fraction between 0 and 1Losing −1 to a slip you could have seen

The values to know by heart

ValueUse
log 2 = 0.301; log 3 = 0.477; log 5 = 0.699; log 7 = 0.845pH, Nernst, ΔG° and K, kinetics. log 4 = 2 log 2 and log 6 = log 2 + log 3
ln x = 2.303 log x; ln 2 = 0.693Half-life of a first-order reaction, t½ = 0.693/k
2.303RT/F ≈ 0.059 V at 298 KNernst equation at room temperature
RT ≈ 2.48 kJ mol−1 at 298 KΔH = ΔU + ΔngRT; ΔG° = −RT ln K
R = 8.314 J K−1 mol−1 = 0.0821 L atm K−1 mol−1 ≈ 0.083 L bar K−1 mol−1Pick the R whose units match the rest of the data
F ≈ 96,500 C mol−1ΔG° = −nFE°; electrolysis
Kw = 1.0 × 10−14 at 298 K, so pH + pOH = 14 at 298 KAcids, bases, salt hydrolysis
If [H+] = a × 10−n, pH = n − log aAny pH without a log table: [H+] = 2 × 10−3 gives pH = 3 − 0.301 = 2.70

The physics side of the paper uses the same habits: symbols first, ratios, and a short list of approximations. Our step-by-step method for NEET physics numericals sets out the version we use there, so a student can practise one routine across both subjects.

From our tutors: when a student's physical chemistry marks stop rising, we ask them to rework five of their wrong answers aloud, one line at a time. The error is rarely the arithmetic. It is usually the relation they wrote in the first line: Δng counted with the liquid water included, n in the Nernst equation taken as 1, the van't Hoff factor forgotten for a salt. Once a student hears themselves say the wrong relation, they stop repeating it far sooner than when they simply read the correct solution.

Worked examples 1 to 6: Units 1 to 4

These examples are written by our team in NEET style. They are not previous-year questions. Try each one before reading the solution, and give yourself about a minute and a half.

Example 1: limiting reagent (Unit 1)

14 g of N2 and 4 g of H2 react to form ammonia: N2 + 3H2 → 2NH3. The maximum mass of ammonia formed is: (a) 17 g (b) 22.7 g (c) 34 g (d) 18 g

Answer: (a) 17 g. Moles: N2 = 14/28 = 0.5 mol; H2 = 4/2 = 2 mol. 0.5 mol of N2 needs 1.5 mol of H2, and 2 mol is available, so N2 is the limiting reagent. NH3 = 2 × 0.5 = 1 mol = 17 g, and 0.5 mol (1 g) of H2 is left over. Check: mass in = 18 g, mass out = 17 g of ammonia + 1 g of unused hydrogen. Trap: option (b) treats hydrogen as limiting (2 × 2/3 mol of NH3 ≈ 22.7 g), and (d) assumes all 18 g of reactant becomes product.

Example 2: empirical and molecular formula (Unit 1)

A compound contains 40.0% carbon, 6.67% hydrogen and 53.33% oxygen by mass. Its molar mass is 180 g mol−1. Its molecular formula is: (a) CH2O (b) C3H6O3 (c) C6H12O6 (d) C6H6O6

Answer: (c) C6H12O6. Take 100 g. Moles: C = 40/12 = 3.33; H = 6.67/1 = 6.67; O = 53.33/16 = 3.33. Divide by the smallest (3.33): C : H : O = 1 : 2 : 1, so the empirical formula is CH2O, mass 30. n = 180/30 = 6, giving C6H12O6. Trap: option (a) stops at the empirical formula; the question asked for the molecular formula. The same method appears in organic Unit 13, where the percentages come from combustion or Carius data.

Example 3: Bohr energy for a hydrogen-like ion (Unit 2)

The energy of the electron in the second orbit (n = 2) of He+ is: (a) −3.4 eV (b) −13.6 eV (c) −54.4 eV (d) −6.8 eV

Answer: (b) −13.6 eV. For a one-electron species, En = −13.6 Z2/n2 eV. For He+, Z = 2; with n = 2, E = −13.6 × 4/4 = −13.6 eV. Trap: option (a) is the value for hydrogen at n = 2 (Z forgotten), and (c) is He+ at n = 1 (n forgotten). The formula applies only to one-electron species: H, He+, Li2+. It does not apply to a helium atom.

Example 4: shape from VSEPR (Unit 3)

The shape of the ClF3 molecule is: (a) trigonal planar (b) trigonal pyramidal (c) T-shaped (d) see-saw

Answer: (c) T-shaped. Chlorine has 7 valence electrons; three form bonds with fluorine, leaving four electrons as two lone pairs. Five electron pairs (3 bond pairs + 2 lone pairs) arrange themselves trigonal bipyramidally, with the two lone pairs in equatorial positions, where repulsion is lowest. The three atoms bonded to chlorine then form a T. Trap: option (a) counts only the bonded atoms and ignores lone pairs; (d) is the shape for four bond pairs and one lone pair, as in SF4. Counting electron pairs, not atoms, is the whole method.

Example 5: when does a reaction become spontaneous? (Unit 4)

For a reaction, ΔH = +40 kJ mol−1 and ΔS = +100 J K−1 mol−1. Assuming both are constant, the reaction is spontaneous: (a) at all temperatures (b) above 400 K (c) below 400 K (d) above 0.4 K

Answer: (b) above 400 K. Spontaneous when ΔG = ΔH − TΔS < 0, that is, T > ΔH/ΔS. Convert first: ΔH = 40,000 J mol−1. T = 40,000/100 = 400 K. Above 400 K the TΔS term outweighs ΔH. Trap: option (d) divides kilojoules by joules. The sign pattern is worth learning: ΔH positive and ΔS positive means spontaneous only at high temperature; ΔH negative and ΔS negative means spontaneous only at low temperature.

Example 6: ΔH and ΔU (Unit 4)

For N2(g) + 3H2(g) → 2NH3(g), ΔH = −92.4 kJ at 298 K. ΔU for the reaction at 298 K is closest to: (a) −92.4 kJ (b) −97.4 kJ (c) −87.4 kJ (d) −89.9 kJ

Answer: (c) −87.4 kJ. ΔH = ΔU + ΔngRT, so ΔU = ΔH − ΔngRT. Δng = moles of gaseous products − moles of gaseous reactants = 2 − 4 = −2. RT ≈ 2.48 kJ at 298 K, so ΔngRT ≈ −4.96 kJ. ΔU = −92.4 − (−4.96) ≈ −87.4 kJ. Trap: option (b) gets the sign of the correction wrong, and (d) uses Δng = −1. Only gases count in Δng: if water were a liquid product, it would not count.

Does your child understand the chemistry but still lose marks in physical chemistry numericals? Book a free NEET Chemistry demo class at home in Gurgaon or online. The tutor will watch a few questions being solved and show you exactly which step is going wrong.

Book a Free NEET Chemistry Demo +91 92204 75088

Worked examples 7 to 12: Units 5 to 8

Example 7: freezing point with the van't Hoff factor (Unit 5)

An aqueous solution of NaCl has a molality of 0.1 mol kg−1. Assuming complete dissociation, its freezing point is (Kf for water = 1.86 K kg mol−1): (a) −0.186 °C (b) −0.372 °C (c) −0.558 °C (d) −1.86 °C

Answer: (b) −0.372 °C. NaCl gives two ions, so i = 2. ΔTf = iKfm = 2 × 1.86 × 0.1 = 0.372 K, and a change of 0.372 K equals a change of 0.372 °C. Water freezes at 0 °C, so the solution freezes at −0.372 °C. Trap: option (a) leaves out i, and (c) uses i = 3, which would suit CaCl2. Colligative properties depend on the number of particles, so always ask how many particles one formula unit gives.

Example 8: solubility product of an MX2 salt (Unit 6)

A sparingly soluble salt MX2 has a solubility of 2 × 10−4 mol L−1 in water. Its Ksp is: (a) 4 × 10−8 (b) 8 × 10−12 (c) 1.6 × 10−11 (d) 3.2 × 10−11

Answer: (d) 3.2 × 10−11. MX2 ⇌ M2+ + 2X−. If the solubility is s, then [M2+] = s and [X−] = 2s, so Ksp = s(2s)2 = 4s3. s3 = 8 × 10−12, so Ksp = 3.2 × 10−11. Trap: option (a) uses s2 as for a 1 : 1 salt, (b) forgets the 4, and (c) writes s × 2s2. Write the dissociation equation every time; the Ksp expression comes straight from it.

Example 9: buffer pH (Unit 6)

A buffer contains 0.2 M sodium acetate and 0.1 M acetic acid. If pKa of acetic acid is 4.74, the pH of the buffer is (log 2 = 0.301): (a) 4.44 (b) 4.74 (c) 5.04 (d) 5.74

Answer: (c) 5.04. For an acidic buffer, pH = pKa + log([salt]/[acid]) = 4.74 + log(0.2/0.1) = 4.74 + 0.301 ≈ 5.04. Sense check: there is more salt than acid, so the pH must be above pKa; that rules out (a) and (b) at once. Trap: option (a) inverts the ratio. Option (d) is the pH when the ratio is 10 : 1, not 2 : 1.

Example 10: Nernst equation and ΔG° (Unit 7)

For the cell Zn | Zn2+(0.01 M) || Cu2+(1 M) | Cu, E°cell = 1.10 V. At 298 K, find Ecell and ΔG° for the cell reaction. (F = 96,500 C mol−1)

Ecell ≈ 1.16 V; ΔG° ≈ −212 kJ mol−1. Cell reaction: Zn + Cu2+ → Zn2+ + Cu, so n = 2. Nernst: E = E° − (0.059/n) log([Zn2+]/[Cu2+]) = 1.10 − 0.0295 × log(0.01) = 1.10 − 0.0295 × (−2) = 1.10 + 0.059 = 1.159 V. ΔG° = −nFE° = −2 × 96,500 × 1.10 = −212,300 J ≈ −212 kJ mol−1. Sense check: a low [Zn2+] means less product, so the cell is pushed forward and E rises above E°. Trap: taking n = 1, or putting the ratio upside down. ΔG° uses E°, not the E you just calculated.

Example 11: a KMnO4 titration (Units 7 and 20)

What volume of 0.02 M KMnO4 is needed to oxidise 20 mL of 0.1 M Fe2+ (from Mohr's salt) in acidic solution? (a) 4 mL (b) 20 mL (c) 100 mL (d) 500 mL

Answer: (b) 20 mL. Balanced ionic equation: MnO4− + 5Fe2+ + 8H+ → Mn2+ + 5Fe3+ + 4H2O (check: charge +17 on both sides). Moles of Fe2+ = 0.020 L × 0.1 = 0.002 mol. Moles of MnO4− = 0.002/5 = 0.0004 mol. Volume = 0.0004/0.02 = 0.020 L = 20 mL. Trap: option (c) uses a 1 : 1 ratio, and (d) multiplies by 5 instead of dividing. Manganese goes from +7 to +2 (five electrons gained); each Fe2+ loses one. This is the Mohr's salt titration named in Unit 20, so it can appear from either unit.

Example 12: first-order kinetics and activation energy (Unit 8)

(i) A first-order reaction is 75% complete in 60 minutes. What is its half-life? (ii) The rate constant of a reaction doubles when the temperature rises from 300 K to 310 K. Estimate the activation energy. (R = 8.314 J K−1 mol−1, log 2 = 0.301)

(i) 30 minutes. (ii) About 53.6 kJ mol−1. (i) 75% complete means 25% remains, which is ½ × ½: two half-lives. So t½ = 60/2 = 30 min, with no logarithm at all. (ii) log(k2/k1) = [Ea/(2.303R)] × (T2 − T1)/(T1T2). So Ea = 2.303 × 8.314 × 0.301 × (300 × 310)/10 ≈ 5.76 × 9300 ≈ 53,600 J mol−1 ≈ 53.6 kJ mol−1. Trap in (i): dividing 60 by 0.75. Trap in (ii): forgetting the 2.303 when using log base 10, or using °C instead of kelvin in T1T2. For any first-order reaction, the time for 99% completion is twice the time for 90%, another result that needs no calculation.

Common traps in physical chemistry numericals

In our experience, the same dozen slips account for most lost marks in NEET physical chemistry. Each has a simple fix.

TrapExampleFix
kJ and J mixedΔH in kJ, ΔS in J K−1 (Example 5)Convert ΔH to joules before dividing or subtracting
Celsius in a formulaArrhenius equation, ΔG = ΔH − TΔS, π = CRTKelvin in every formula; a temperature difference is the same in K and °C
Molarity and molality confusedUsing mol L−1 in ΔTf = KfmColligative ΔT uses molality (per kg of solvent); osmotic pressure uses molarity
van't Hoff factor forgottenNaCl, CaCl2, K2SO4 treated as i = 1Count the ions per formula unit; association (for example, acetic acid dimers in benzene) gives i below 1
Liquids counted in ΔngWater in combustion reactions at 298 KΔng counts gaseous moles only
Wrong n in Nernst or ΔG°n = 1 for a two-electron cellBalance the cell reaction and count electrons transferred
Ksp expression for 1 : 2 saltss2 used for MX2 (Example 8)Write the dissociation equation; for MX2 Ksp = 4s3
pH of a very dilute acid10−8 M HCl given pH 8An acid can never give a pH above 7; water's own H+ matters here, and the pH is just below 7
Ratio upside downBuffer, NernstSense-check the direction before choosing (Example 9)
ΔG and ΔG° confusedUsing ΔG° = 0 at equilibriumAt equilibrium ΔG = 0 and ΔG° = −RT ln K
Bohr formula used for many-electron atomsApplying −13.6Z2/n2 to He or LiOne-electron species only
Early roundingRounding 0.0295 to 0.03 at the start of a Nernst calculationKeep symbols until the last step; round once

Keep these as columns in an error log: the question, the trap from this table, and the line where it happened. After a few weeks, most students find two or three traps that recur, and drilling those is the quickest gain in this part of the paper.

From our tutors: Class 12 students often cope well with electrochemistry and kinetics, which they are studying at school, and then lose marks in Class 11 equilibrium and the mole concept, which they last practised a year ago. We put one Class 11 physical chemistry question into every Class 12 session, even when the session is about a Class 12 chapter. It takes five minutes, and it stops the Class 11 units going cold before the mock-test season.

Study order and a weekly practice routine

Physical chemistry is the most sequential part of NEET chemistry: each unit uses the one before. Study it in dependency order, not only in book order.

  1. Unit 1, the mole concept, first and thoroughly. Limiting reagent, empirical formula and molarity appear inside solutions, equilibrium, titrations and organic quantitative analysis. A slow Unit 1 slows every later unit.
  2. Units 2 and 3 next, in Class 11. They are lighter on calculation but full of rules (quantum numbers, VSEPR, MO configurations) that inorganic and organic chemistry rely on.
  3. Unit 4 before Unit 6. ΔG° = −2.303RT log K links thermodynamics to equilibrium; learning them in this order means the link makes sense.
  4. Unit 6 in two parts: chemical equilibrium (Kc, Kp, Le Chatelier) and then ionic equilibrium (pH, Ka, hydrolysis, buffers, Ksp). Ionic equilibrium is where most students need the most practice.
  5. Redox (Unit 7, Class 11 half) before electrochemistry, because balancing and oxidation numbers are needed for both cells and titrations.
  6. In Class 12: Unit 5, then electrochemistry, then Unit 8. Each is shorter than the Class 11 units, but each has a formula set that must be practised, not just read.

A weekly routine for a student at school in Gurgaon or anywhere in Gurugram, preparing alongside the board syllabus:

WhenWhat
After each NCERT sectionThe in-text problems and exercises, written in full with all six steps, even when they look easy
Twice a weekA timed set of 15 to 20 multiple-choice questions on the current unit, at about a minute and a half each, with no calculator
Once a weekA mixed set from all units finished so far, including at least one Class 11 unit
Every day, 5 minutesLog values, powers of ten and unit conversions, done mentally
End of the weekReview the error log; redo every wrong question without looking at the solution

Keep our NEET chemistry formula sheet beside you while practising; it lists the physical chemistry formulas unit by unit with the condition under which each one holds. If you would like a tutor to run this routine with your child, our NEET tuition at home in Gurgaon covers all three subjects, with one plan across them.

Frequently asked questions

Which chapters are in physical chemistry for NEET?

In the NMC's NEET (UG) 2026 syllabus, physical chemistry is Units 1 to 8: some basic concepts in chemistry, atomic structure, chemical bonding and molecular structure, chemical thermodynamics, solutions, equilibrium, redox reactions and electrochemistry, and chemical kinetics. In NCERT these are Class 11 Units 1, 2, 4, 5, 6 and 7 and Class 12 Units 1, 2 and 3.

Is solid state in the NEET syllabus?

Not in 2026. The NMC 2026 chemistry syllabus has no solid state unit, and the current NCERT Class 12 book has no solid state chapter. The same is true of states of matter and surface chemistry, apart from the preparation of lyophilic and lyophobic sols named in Unit 20. Re-check when the 2027 syllabus is published.

Are calculators or log tables allowed in NEET?

No. The NEET (UG) 2026 Information Bulletin lists calculators, slide rules and log tables among items not allowed in the examination hall. Learn log 2, log 3, log 5 and log 7, and the rule pH = n − log a for [H+] = a × 10−n.

How many physical chemistry questions come in NEET?

Neither NTA nor NMC publishes a count by unit or by branch. The bulletin gives 45 chemistry questions in total. Treat any physical chemistry count you see as somebody's count of past papers, not an official figure.

Is NCERT enough for NEET physical chemistry?

For concepts and the formula set, NCERT covers the syllabus. For speed, most students need more timed multiple-choice practice than the NCERT exercises give, because NCERT problems are written for working out in full rather than for one and a half minutes each. Use NCERT first, then previous-year questions and one question bank.

Is physical chemistry harder than organic chemistry for NEET?

They are hard in different ways. Physical chemistry rewards a steady method and accurate arithmetic; organic rewards understanding electron movement and practising reactions. Students who like numericals often find physical chemistry the most predictable part of the paper once the traps are under control.

How can I solve physical chemistry numericals faster?

Solve in symbols before substituting, use ratios and shortcuts such as counting half-lives, keep a short list of log values in your head, and check the options for sign and order of magnitude. Speed comes from removing arithmetic, not from skipping the step where you write the relation.

Want a tutor to build a physical chemistry routine around your child's own error log? Book a free NEET Chemistry demo with Ajay Vatsyayan Classes, Saraswati kunj II, Wazirabad, Sector 52, Gurugram, Haryana 122003. Male and female tutors are available, at home in Gurgaon or live one-to-one online elsewhere.

Book a Free NEET Chemistry Demo +91 92204 75088

About this guide

Written by the Ajay Vatsyayan Classes Home Tutors Team, a Gurgaon home-tuition service with 12+ years of experience and 25,000+ students taught.

Reviewed by Ajay Vatsyayan (Founder; B.Tech; IB and Cambridge IGCSE experienced).

Exam facts are checked against official NTA, CBSE and CISCE documents. Always confirm dates and rules in the current official bulletin.