12+ Years of One-to-One Home Tuition in Gurgaon – Ajay Vatsyayan Classes JEE/NEET | CBSE, ICSE, IGCSE & IB | Verified Home Tutors in Gurgaon Expert Home Tutors for Maths, Science, English, Accounts in Gurgaon Home Tuition at Your Home or Live Online – Book a Free Demo Class Home Tutors Near You – Maths, Science, English & More 12+ Years of One-to-One Home Tuition in Gurgaon – Ajay Vatsyayan Classes JEE/NEET | CBSE, ICSE, IGCSE & IB | Verified Home Tutors in Gurgaon Expert Home Tutors for Maths, Science, English, Accounts in Gurgaon Home Tuition at Your Home or Live Online – Book a Free Demo Class Home Tutors Near You – Maths, Science, English & More
×

ICSE Class 10 Guide

  1. Home
  2. ICSE Class 10 Tuition in Gurgaon
  3. ICSE chemistry guide
By Ajay Vatsyayan Classes Home Tutors Team Reviewed by Ajay Vatsyayan Last reviewed: 23 Oct 2026

Part of our ICSE Class 10 guide

Looking for one-to-one help? See our icse class 10 tuition in gurgaon page.

ICSE Class 10 Chemistry: Chapters, Study Method and Mole Concept Help for Gurgaon Students

ICSE Class 10 chemistry for 2027 has nine official chapters, from periodic properties to organic chemistry, tested in one two-hour, 80-mark paper with 20 more marks for practical work. Most marks come from three skills: writing balanced equations with conditions, recalling exact observations (colours, precipitates, gases), and solving mole concept numericals step by step.

This guide is part of our ICSE Class 10 tuition in Gurgaon series. It lists the chapters exactly as CISCE heads them, shows which skill each chapter tests, explains how to learn equations and observations so they stay learnt, works through mole concept numericals we have checked by calculation, and covers the practical work. All syllabus points come from the ICSE 2027 Chemistry syllabus.

The ICSE 2027 Chemistry paper and chapters

According to the ICSE 2027 Chemistry syllabus (Science Paper 2), Class 10 has "one paper of two hours duration of 80 marks and Internal Assessment of practical work carrying 20 marks". The full syllabus is on the official ICSE 2027 regulations and syllabuses page. The Class 10 chapters are:

  1. Periodic Properties and variations of Properties
  2. Chemical Bonding
  3. Study of Acids, Bases and Salts
  4. Analytical Chemistry
  5. Mole Concept and Stoichiometry
  6. Electrolysis
  7. Metallurgy
  8. Study of Compounds (hydrogen chloride, ammonia, nitric acid and sulphuric acid)
  9. Organic Chemistry

The syllabus opens Class 10 with one instruction that shapes the whole subject: "All chemical processes/reactions should be studied with reference to the reactants, products, conditions, observations and the (balanced) equations and diagrams." If your child learns every reaction in those five parts, most chapters become manageable.

CISCE has released a 2027 Chemistry specimen paper with an answer key. Our ICSE specimen paper 2027 guide explains how to use it in the last weeks before the exam.

What each chapter really tests

ChapterMain skillPoints named in the 2027 syllabus
Periodic PropertiesTrends and reasonsAtomic size, metallic and non-metallic character, ionisation potential, electron affinity, electronegativity; periodic table up to period 4 (no questions beyond calcium)
Chemical BondingElectron dot diagramsElectrovalent (NaCl, MgCl2, CaO), covalent (H2, Cl2, O2, N2, CCl4, CH4; polar HCl, NH3, H2O), coordinate bonding (H3O+, NH4+)
Acids, Bases and SaltsEquations and methodsIndicators and pH; types of salts; action of dilute acids on salts; methods of preparing normal salts
Analytical ChemistryObservationsNaOH and NH4OH on salts of Fe, Cu, Zn and Pb; amphoteric nature of Al, Zn and Pb compounds
Mole Concept and StoichiometryNumericalsGay-Lussac's law, Avogadro's law, molar volume (22.4 L at STP), vapour density, empirical and molecular formulae, calculations from equations
ElectrolysisElectrode reactionsMolten lead bromide, acidified water, aqueous copper(II) sulphate; electroplating with nickel and silver; electro-refining of copper
MetallurgyProcesses and equationsOres of iron, aluminium and zinc; concentration, roasting and calcination, reduction; Baeyer's process and Hall-Heroult process; alloys
Study of CompoundsPreparations, properties, testsHCl (fountain experiment), ammonia (Haber's process), nitric acid (Ostwald's process), sulphuric acid (Contact process)
Organic ChemistryStructures, names, reactionsIsomerism, homologous series, IUPAC names, alkanes, alkenes, alkynes, ethanol, acetic acid

Only one chapter, Mole Concept and Stoichiometry, is mainly numerical. The rest reward accurate recall and clear explanation. That is why ICSE chemistry rewards steady revision more than last-minute cramming.

How to learn equations, conditions and observations

Chemistry equations are not learnt by reading them. They are learnt by writing them, from memory, many times, spaced over weeks.

The five-part card

For every reaction in the syllabus, make one card (or one row in a notebook) with five parts, following the syllabus instruction:

  1. Reactants
  2. Products
  3. Conditions: temperature, pressure, catalyst, concentration (dilute or concentrated), heat
  4. Observation: colour change, gas evolved, precipitate, smell
  5. Balanced equation

Test yourself from any one part. For example, read only "reddish-brown precipitate with sodium hydroxide, insoluble in excess" and write the rest.

Industrial processes as a table

Haber's, Ostwald's and Contact processes are often asked together. Make one comparison table with the raw materials, catalyst, temperature, pressure and main equations for each, taken from your textbook. Seeing them side by side stops the conditions from mixing up.

Balancing as a daily habit

An unbalanced equation usually loses marks even if the reactants and products are right. Five minutes a day of writing and balancing ten equations from memory is more effective than an hour once a week.

From our tutors: the students who struggle most with ICSE chemistry are often the ones who "read it many times". Reading feels productive but tests nothing. We switch them to blank-page recall: write every equation from a chapter on a blank page, then check against the book and correct in red. In the first week the page is mostly red. Within a few weeks of daily practice it usually is not.

Analytical chemistry: the observation table

The syllabus asks for the action of sodium hydroxide and ammonium hydroxide, added "drop by drop in excess", on solutions of salts of iron, copper, zinc and lead. This is the most "table-friendly" topic in the subject. Learn it as one grid.

Metal ion in solutionWith NaOH, few dropsWith NaOH in excessWith NH4OH, few dropsWith NH4OH in excess
Fe2+ (e.g. iron(II) sulphate)Dirty green precipitateInsolubleDirty green precipitateInsoluble
Fe3+ (e.g. iron(III) chloride)Reddish-brown precipitateInsolubleReddish-brown precipitateInsoluble
Cu2+ (e.g. copper(II) sulphate)Pale blue precipitateInsolublePale blue precipitateDissolves to give a deep (inky) blue solution
Zn2+ (e.g. zinc nitrate)White gelatinous precipitateDissolves (colourless solution)White gelatinous precipitateDissolves (colourless solution)
Pb2+ (e.g. lead nitrate)White chalky precipitateDissolves (colourless solution)White chalky precipitateInsoluble

The two rows that decide most questions are copper (only ammonium hydroxide in excess gives the deep blue solution) and lead versus zinc (both dissolve in excess sodium hydroxide, but only zinc's precipitate dissolves in excess ammonium hydroxide). Learn the equations for each row too, as the syllabus asks for formation of the hydroxide "with the help of equations".

Electrolysis and metallurgy

Electrolysis questions ask for the electrolyte, the electrodes, the ions present, the reaction at each electrode and what you observe. The syllabus names three examples; learn them as a set.

Electrolysis ofAt the cathodeAt the anodeKey observation
Molten lead bromideLead is depositedBromine is releasedReddish-brown bromine vapour at the anode; silvery lead at the cathode
Acidified water (platinum electrodes)HydrogenOxygenGases in the volume ratio 2 : 1 (hydrogen : oxygen)
Copper(II) sulphate solution with platinum electrodesCopper is depositedOxygen is releasedThe blue colour fades as copper ions are used up
Copper(II) sulphate solution with copper electrodesCopper is depositedThe copper anode dissolvesThe blue colour stays the same; this is the basis of electro-refining

Two ideas explain all four rows: which ion is discharged depends on the activity series and the electrodes (selective discharge), and an active anode (copper) can itself go into solution. Students who understand these two ideas rarely need to memorise the table separately.

In metallurgy, the syllabus limits aluminium extraction to Baeyer's process (purifying bauxite with NaOH) and the Hall-Heroult process (electrolytic extraction). Learn the purpose of each substance added in the cell, because "Why is ... added?" is a favourite question form.

Is your child losing chemistry marks to forgotten equations or confused observations? Book a free demo class in Gurgaon, at home or online, and our tutor will show you a revision system that sticks.

Book a Free Chemistry Demo +91 92204 75088

Mole concept and stoichiometry: worked examples

This is the numerical chapter. The syllabus includes Gay-Lussac's law of combining volumes, Avogadro's law, molar volume ("the mass of 22.4 litres of any gas at S.T.P. is equal to its molar mass"), molecular mass = 2 × vapour density, empirical and molecular formulae, and calculations from chemical equations. Take relative atomic masses H = 1, C = 12, N = 14, O = 16, Ca = 40 in the examples below. Each answer has been checked by calculation.

Worked example 1 (Mass, moles, volume, molecules): Find the number of moles, the volume at STP and the number of molecules in 11 g of carbon dioxide (Avogadro's number = 6.022 × 1023).

Answer: 0.25 mol; 5.6 L; about 1.51 × 1023 molecules. Molar mass of CO2 = 12 + 2 × 16 = 44 g/mol. Moles = 11/44 = 0.25 mol. Volume at STP = 0.25 × 22.4 = 5.6 L. Molecules = 0.25 × 6.022 × 1023 ≈ 1.51 × 1023. The mole is the bridge: always convert to moles first, then to whatever the question asks.

Worked example 2 (Gay-Lussac's law): What volume of oxygen is needed to burn 40 cm3 of methane completely, and what volume of carbon dioxide is formed? (All volumes at the same temperature and pressure.)

Answer: 80 cm3 of oxygen; 40 cm3 of carbon dioxide. CH4 + 2O2 → CO2 + 2H2O. By Gay-Lussac's law, gas volumes react in the ratio of the coefficients: 1 : 2 : 1 for CH4 : O2 : CO2. So 40 cm3 of methane needs 80 cm3 of oxygen and gives 40 cm3 of carbon dioxide. Trap: including water in the volume ratio when the question says the water condenses; read the conditions carefully.

Worked example 3 (Empirical and molecular formula): A compound contains 40% carbon, 6.67% hydrogen and 53.33% oxygen by mass. Its vapour density is 30. Find its empirical and molecular formulae.

Answer: empirical formula CH2O; molecular formula C2H4O2. Divide each percentage by the atomic mass: C 40/12 = 3.33; H 6.67/1 = 6.67; O 53.33/16 = 3.33. Divide by the smallest (3.33): C 1, H 2, O 1, so the empirical formula is CH2O, with empirical formula mass 12 + 2 + 16 = 30. Molecular mass = 2 × vapour density = 2 × 30 = 60. n = 60/30 = 2, so the molecular formula is (CH2O)2 = C2H4O2.

Worked example 4 (Calculation from an equation): Calcium carbonate decomposes on heating: CaCO3 → CaO + CO2. What mass of calcium oxide and what volume of carbon dioxide at STP are obtained from 50 g of calcium carbonate?

Answer: 28 g of CaO; 11.2 L of CO2. Molar masses: CaCO3 = 40 + 12 + 48 = 100 g; CaO = 40 + 16 = 56 g. From the equation, 1 mol (100 g) of CaCO3 gives 1 mol (56 g) of CaO and 1 mol (22.4 L at STP) of CO2. 50 g is 0.5 mol, so it gives 0.5 × 56 = 28 g of CaO and 0.5 × 22.4 = 11.2 L of CO2.

Worked example 5 (Percentage composition): Find the percentage of nitrogen in ammonium nitrate, NH4NO3.

Answer: 35%. Molar mass = 14 + 4 × 1 + 14 + 3 × 16 = 80 g/mol. It contains two nitrogen atoms: 2 × 14 = 28 g. Percentage of nitrogen = 28/80 × 100 = 35%. Trap: counting only one nitrogen because the formula is written in two parts.

Mole concept is the one place where chemistry borrows the habits of maths and physics: write the data, convert to moles, use the ratio from the equation, convert back, and check units. Our ICSE Class 10 physics numericals guide uses the same step-by-step method, and our ICSE Class 10 maths formulas page helps with ratio and percentage work.

Organic chemistry

Organic chemistry feels new because it is the first time students see carbon compounds in a system. The 2027 syllabus keeps it focused:

  • Structure and isomerism: structural formulae of alkanes, alkenes and alkynes up to 5 carbon atoms; chain and position isomerism.
  • Homologous series: characteristics, and how properties change with molecular mass.
  • Nomenclature: trivial and IUPAC names for compounds with one functional group (halide, double bond, triple bond, alcohol, aldehyde, carboxylic acid, ketone, ether, ester), using the longest-chain and smallest-number rules.
  • Hydrocarbons: preparation and reactions of methane, ethane, ethene and ethyne, including substitution with chlorine and addition of hydrogen and halogens.
  • Ethanol and acetic acid: preparation, properties and uses, including esterification and the dehydration of ethanol with concentrated sulphuric acid to form ethene.

The fastest way to get comfortable is to draw. Draw every isomer of pentane, then of butene. Name each one aloud using the IUPAC rules. Then write each named reaction as a five-part card, like the inorganic reactions.

From our tutors: in organic chemistry, the error we see most is numbering the carbon chain from the wrong end, which gives "3-butene" instead of "1-butene". We ask students to number from both ends every time and pick the one that gives the functional group the smaller number. It takes ten extra seconds and saves the mark.

Practical work (20 marks)

The internal-assessment part of the Chemistry mark is practical work, marked by the subject teacher (10 marks) and an external examiner (10 marks), who may be a teacher from the school who does not teach that class. Students observe the effect of reagents or heat on substances and identify gases and ions.

  • Gases to recognise: hydrogen, oxygen, carbon dioxide, chlorine, hydrogen chloride, sulphur dioxide, hydrogen sulphide, ammonia, water vapour and nitrogen dioxide.
  • Ions to identify: copper, iron, lead, zinc and ammonium; carbonate, chloride, nitrate, sulphide, sulphite and sulphate.
  • Minimum practical work in the syllabus: the action of heat on copper carbonate, zinc carbonate, zinc nitrate, copper nitrate and lead nitrate; NaOH and NH4OH tests on unknown solutions; telling an acid from an alkali with two tests each; and warming copper oxide and manganese dioxide with concentrated hydrochloric acid.

The analytical chemistry table above and the gas tests from Study of Compounds are the same knowledge used in the lab, so revising them together is efficient. The syllabus says a formal scheme of analysis is not required.

Common mistakes and how to avoid them

MistakeFix
Equations correct but unbalancedBalance every equation you write, even in rough work
Conditions missing (catalyst, temperature, dilute or concentrated)Use the five-part card; conditions are a separate line
Vague observations ("a precipitate forms")Always give the colour and nature: "white gelatinous precipitate"
Mixing up zinc and lead with ammonium hydroxideLearn the observation table as a grid, not as sentences
Skipping the mole step in numericalsConvert to moles first, every time
Wrong IUPAC numberingNumber from both ends and choose the lower number for the functional group
Electron dot diagrams with the wrong number of electronsCount valence electrons before drawing; check the octet (or duplet for hydrogen)

A study plan for the year

For ICSE Class 10 students in Gurugram, school tests, prelims and practical records all compete for time. A plan that works for most:

  1. During the term: after each chapter, make the five-part cards and the summary table for it. Ten minutes of equation recall a day.
  2. Weekly: one short mole concept set (five questions) even after the chapter is over, so numericals stay fresh.
  3. Before prelims: revise chapter by chapter using cards and past-paper questions; our ICSE Class 10 prelims preparation guide has a 6-week plan.
  4. After prelims: sort lost marks into "equation", "observation", "numerical" and "explanation", and fix the biggest group first.
  5. Last weeks: the specimen paper under time, then targeted revision from your error log.

Chemistry pairs well with maths practice, because the numerical chapter uses ratio and percentage. Our guide on how to score 95 in ICSE maths shows the same error-log approach for maths. We teach ICSE students from schools such as The Shri Ram School (Aravali and Moulsari campuses), Shikshantar School and Lt. Atul Katarya Memorial School, at home in Gurgaon or online. We are not affiliated with any school named here.

Ajay Vatsyayan Classes has taught 25,000+ students in 12+ years in Gurgaon. Book a free demo class and our Home Tutors Team will build an ICSE chemistry revision plan around your child's weak chapters.

Book a Free Demo Class +91 92204 75088

Frequently asked questions

How many chapters are in ICSE Class 10 Chemistry for 2027?

Nine: Periodic Properties; Chemical Bonding; Study of Acids, Bases and Salts; Analytical Chemistry; Mole Concept and Stoichiometry; Electrolysis; Metallurgy; Study of Compounds; and Organic Chemistry.

How long is the ICSE Class 10 Chemistry paper?

Two hours, for 80 marks. Practical work carries another 20 marks in internal assessment.

Which are the important topics in ICSE Class 10 Chemistry?

Every chapter can be asked, but the topics students lose most marks in are mole concept numericals, the NaOH and NH4OH observation table, electrolysis electrode reactions, the industrial processes in Study of Compounds, and IUPAC naming in organic chemistry.

How do I remember chemistry equations for ICSE?

Write them, do not just read them. Learn each reaction as reactants, products, conditions, observations and the balanced equation, and test yourself from a blank page several times a week.

Is the mole concept difficult in ICSE Class 10?

It feels difficult until the steps are fixed. Convert to moles, use the ratio from the balanced equation, convert back to mass or volume, and check units. With regular practice it becomes one of the more predictable chapters.

Is there a 2027 specimen paper for ICSE Chemistry?

Yes. Chemistry is one of the ICSE subjects in CISCE's 09 October 2026 circular on 2027 specimen papers and answer keys.

What is tested in the ICSE Chemistry practical?

Recognising listed gases and identifying listed ions through the action of reagents and heat, plus the minimum practical work set out in the syllabus. It is marked by the subject teacher and an external examiner, 10 marks each.

About this guide

Written by the Ajay Vatsyayan Classes Home Tutors Team, a Gurgaon home-tuition service with 12+ years of experience and 25,000+ students taught.

Reviewed by Ajay Vatsyayan (Founder; B.Tech; IB and Cambridge IGCSE experienced).

Exam facts are checked against official NTA, CBSE and CISCE documents. Always confirm dates and rules in the current official bulletin.