Looking for one-to-one help? See our class 12 home tutors in gurgaon page.
The most useful CBSE Class 12 Maths important questions are the question types CBSE itself uses in its official 2026–27 sample question paper: equivalence relations, inverse-matrix systems, rates of change, maxima, area under curves, differential equations, shortest distance between lines, graphical linear programming and Bayes' theorem. No one can tell you which exact questions will appear in 2027, but a student who can solve every type below, accurately and with full steps, is prepared for the paper CBSE has described.
This guide maps each unit to the question types in the 2026–27 SQP, then gives 13 original practice questions (two per unit, three for Calculus) with full solutions. Every answer was worked by hand and confirmed with SymPy, a Python algebra library. It is part of our Class 12 tuition in Gurgaon series for CBSE and ISC families.
CBSE's 2026–27 curriculum says "No chapter wise weightage. Care to be taken to cover all the chapters", so any chapter can appear in any section. So we treat "important" as the question types in CBSE's own sample paper, not a list to memorise. Three rules make practice count:
For unit marks and chapter content, see our CBSE Class 12 Maths syllabus 2026-27 guide.
The 2026–27 SQP has 38 compulsory questions for 80 marks in 3 hours, with no calculators: Section A has 18 MCQs and 2 Assertion–Reason items (1 mark each), B has five 2-mark, C six 3-mark and D four 5-mark questions, and E has three 4-mark case studies. Every 2026–27 Class XII SQP notes, "There is no change in the Question Paper Design and Assessment Pattern for Academic Session 2026-27". The table below describes this one official sample, unit by unit; it is not a forecast of the 2027 paper.
| Unit (marks) | Question types seen in the 2026–27 SQP |
|---|---|
| Relations and Functions (8) | MCQs on inverse trigonometric graphs, domains and principal values. A 5-mark long answer (with internal choice) on an equivalence relation, or on whether a function is one-one and onto. |
| Algebra (10) | MCQs on a symmetric matrix, a determinant property and a matrix equation. A 3-mark question on a matrix product and its inverse. A case study on writing a real-life situation as a matrix equation and solving it with the adjoint and inverse. |
| Calculus (35) | MCQs on derivatives, differentiability of a piecewise function, decreasing functions, and the order and degree of a differential equation. Assertion–Reason items on a definite integral and on a general solution. Short answers on integrals, implicit differentiation, a word-based rate of change and a particular solution. Long answers on a definite integral and on area by integration. A case study on maxima using the second derivative test. |
| Vectors and 3D Geometry (14) | MCQs on magnitude, direction angles and a vector perpendicular to two others. 2-mark questions on parallel lines and on dot and cross products. A 3-mark question on the foot of a perpendicular (or the angle between lines). A case study on parallel lines and shortest distance. |
| Linear Programming (5) | A 2-mark question on writing the constraints of a shaded feasible region, and a 3-mark question on solving a problem graphically. |
| Probability (8) | MCQs on independent events and conditional probability with dice. A 5-mark long answer on total probability and Bayes' theorem in a real-life setting. |
Two patterns stand out: Calculus appears in every section, and case studies wrap ordinary methods (matrix inverse, maxima, shortest distance) in a real-world story, so the skill tested is turning words into the right equation.
Practise principal values and full equivalence-relation proofs, checking all three properties separately.
Practice 1: Let A = {1, 2, 3, 4, 5, 6} and R = {(a, b) : |a − b| is even}. Show that R is an equivalence relation on A, and write the equivalence classes [1] and [2].
Answer: R is an equivalence relation; [1] = {1, 3, 5}, [2] = {2, 4, 6}. Reflexive: for every a in A, |a − a| = 0, which is even, so (a, a) ∈ R. Symmetric: if (a, b) ∈ R, then |b − a| = |a − b| is even, so (b, a) ∈ R. Transitive: if (a, b) and (b, c) are in R, then a − b and b − c are both even, so a − c = (a − b) + (b − c) is even, and (a, c) ∈ R. The elements related to 1 are those at an even distance from it: 1, 3 and 5. The elements related to 2 are 2, 4 and 6. Trap: checking transitivity with one example only; it must be shown for all a, b, c.
Practice 2: Find the value of sin−1(−1/2) + cos−1(−1/2) + tan−1(1).
Answer: 3π/4. Use the principal value branches. sin−1 takes values in [−π/2, π/2], so sin−1(−1/2) = −π/6. cos−1 takes values in [0, π], so cos−1(−1/2) = π − π/3 = 2π/3. tan−1(1) = π/4. The sum is −2π/12 + 8π/12 + 3π/12 = 9π/12 = 3π/4. Trap: writing cos−1(−1/2) = −π/3, which lies outside the range [0, π].
Two skills matter here: careful matrix arithmetic, and solving three equations by the inverse (adjoint) method.
Practice 3: For A = [[3, 1], [−1, 2]], show that A2 − 5A + 7I = O, and hence find A−1.
Answer: A−1 = (1/7)[[2, −1], [1, 3]]. A2 = A × A = [[8, 5], [−5, 3]]. 5A = [[15, 5], [−5, 10]] and 7I = [[7, 0], [0, 7]]. So A2 − 5A + 7I = [[8 − 15 + 7, 0], [0, 3 − 10 + 7]] = O. Multiply A2 − 5A + 7I = O by A−1 (which exists because |A| = 7 ≠ 0): A − 5I + 7A−1 = O, so A−1 = (5I − A)/7 = (1/7)[[2, −1], [1, 3]].
Practice 4: Solve using the inverse of a matrix: x + y + z = 6, 2x − y + z = 3, x − 2y + 3z = 6.
Answer: x = 1, y = 2, z = 3. Write AX = B with A = [[1, 1, 1], [2, −1, 1], [1, −2, 3]] and B = [6, 3, 6]T. |A| = 1(−3 + 2) − 1(6 − 1) + 1(−4 + 1) = −1 − 5 − 3 = −9 ≠ 0, so a unique solution exists. The cofactors are C11 = −1, C12 = −5, C13 = −3, C21 = −5, C22 = 2, C23 = 3, C31 = 2, C32 = 1, C33 = −3. So adj A = [[−1, −5, 2], [−5, 2, 1], [−3, 3, −3]], and A−1 = (1/9)[[1, 5, −2], [5, −2, −1], [3, −3, 3]]. Then X = A−1B = (1/9)[6 + 15 − 12, 30 − 6 − 6, 18 − 9 + 18] = (1/9)[9, 18, 27] = [1, 2, 3]. Trap: forgetting to transpose the cofactor matrix when forming the adjoint.
Calculus carries 35 of 80 marks, so it gets three practice questions here, covering the three long-form tasks in the SQP: an applied derivative problem, an area by integration and a differential equation.
Practice 5: An open box is made from a rectangular sheet 16 cm by 6 cm by cutting equal squares of side x cm from each corner and folding up the sides. Find x for maximum volume, and the maximum volume.
Answer: x = 4/3 cm; maximum volume = 1600/27 cm3 (about 59.3 cm3). V = x(16 − 2x)(6 − 2x) = 4x3 − 44x2 + 96x, for 0 < x < 3. dV/dx = 12x2 − 88x + 96 = 4(3x − 4)(x − 6). Setting this to zero gives x = 4/3 or x = 6; x = 6 is impossible because the sheet is only 6 cm wide. d2V/dx2 = 24x − 88, which at x = 4/3 equals 32 − 88 = −56 < 0, so V is a maximum. V = (4/3)(16 − 8/3)(6 − 8/3) = (4/3)(40/3)(10/3) = 1600/27 cm3. Trap: not stating the domain, and so not rejecting x = 6.
Practice 6: Using integration, find the area of the region enclosed by the parabola y = x2 and the line y = x + 2.
Answer: 9/2 square units. The curves meet where x2 = x + 2, that is x2 − x − 2 = 0, so x = −1 or x = 2. Between these points the line lies above the parabola (at x = 0, the line gives 2 and the parabola 0). Area = ∫−12 (x + 2 − x2) dx = [x2/2 + 2x − x3/3] from −1 to 2 = (2 + 4 − 8/3) − (1/2 − 2 + 1/3) = 10/3 + 7/6 = 27/6 = 9/2. Trap: integrating the parabola minus the line, which gives −9/2; always sketch the region and subtract lower from upper.
Practice 7: Solve the differential equation dy/dx + y/x = x2 (x > 0), given that y = 1 when x = 1.
Answer: y = x3/4 + 3/(4x). This is linear, with P = 1/x and Q = x2. The integrating factor is e∫(1/x)dx = elog x = x. Multiplying through: x(dy/dx) + y = x3, so d(xy)/dx = x3, and xy = x4/4 + C. With y(1) = 1: 1 = 1/4 + C, so C = 3/4. Hence xy = x4/4 + 3/4, or y = x3/4 + 3/(4x). Substituting back into the equation confirms it.
From our tutors: in calculus long answers, students rarely lose marks on the hard step. They lose them on the missing line that says why: the domain that rules out a root, the second-derivative check, the sketch showing which curve is on top. We train students to write one short sentence of reasoning at each of these points.
Want your child's calculus answers checked line by line? Book a free demo. Our Class 12 Maths home tutors in Gurgaon teach one-to-one at home or online.
Book a Free Class 12 Maths Demo +91 92204 75088The 2026–27 3D geometry syllabus is about lines (equations, angles, skew lines and shortest distance); vectors questions mostly test dot and cross products.
Practice 8: Let a = i + 2j + 2k and b = 2i + j − 2k. Show that a and b are perpendicular, find a unit vector perpendicular to both, and find the area of the parallelogram with a and b as adjacent sides.
Answer: a · b = 0; unit vectors ±(−2i + 2j − k)/3; area 9 square units. a · b = 1×2 + 2×1 + 2×(−2) = 0, so a ⊥ b. a × b = (2×(−2) − 2×1)i − (1×(−2) − 2×2)j + (1×1 − 2×2)k = −6i + 6j − 3k. Its magnitude is √(36 + 36 + 9) = 9. A unit vector perpendicular to both is (−6i + 6j − 3k)/9 = (−2i + 2j − k)/3, or its negative. The area of the parallelogram is |a × b| = 9.
Practice 9: Find the shortest distance between the lines r = (i + 2j + 3k) + λ(i − j + k) and r = (2i − j + k) + μ(2i + j − k).
Answer: 5/√2 = 5√2/2 units (about 3.54). Here a1 = (1, 2, 3), b1 = (1, −1, 1), a2 = (2, −1, 1), b2 = (2, 1, −1). The direction vectors are not parallel, so use SD = |(a2 − a1) · (b1 × b2)| / |b1 × b2|. a2 − a1 = (1, −3, −2). b1 × b2 = ((−1)(−1) − 1×1, −(1×(−1) − 1×2), 1×1 − (−1)×2) = (0, 3, 3), with magnitude 3√2. The dot product is 0 − 9 − 6 = −15. SD = 15/(3√2) = 5/√2. Trap: using this formula for parallel lines, where b1 × b2 = 0; parallel lines need the separate formula |b × (a2 − a1)| / |b|.
Only 5 marks, but dependable if the graph is neat and every corner point is checked.
Practice 10: Maximise Z = 3x + 2y subject to x + 2y ≤ 10, 3x + y ≤ 15, x ≥ 0, y ≥ 0.
Answer: maximum Z = 18 at (4, 3). The feasible region is bounded, with corner points O(0, 0), (5, 0) on 3x + y = 15, (0, 5) on x + 2y = 10, and the intersection of the two lines. Solving x + 2y = 10 and 3x + y = 15: from the second, y = 15 − 3x; substituting, x + 30 − 6x = 10, so x = 4 and y = 3. Values of Z: at (0, 0), 0; at (5, 0), 15; at (0, 5), 10; at (4, 3), 12 + 6 = 18. The maximum is 18 at (4, 3). Trap: missing the intersection point and choosing (5, 0).
Practice 11: Minimise Z = 2x + 3y subject to x + y ≥ 4, x + 3y ≥ 6, x ≥ 0, y ≥ 0.
Answer: minimum Z = 9 at (3, 1). The feasible region is unbounded, with corner points (0, 4), (3, 1) and (6, 0); (3, 1) comes from solving x + y = 4 and x + 3y = 6. Values of Z: at (0, 4), 12; at (3, 1), 9; at (6, 0), 12. Because the region is unbounded, check that the open half-plane 2x + 3y < 9 has no point in common with it. It does not: the line 2x + 3y = 9 touches the region only at (3, 1). (Algebraically, 2x + 3y = 1.5(x + y) + 0.5(x + 3y) ≥ 1.5 × 4 + 0.5 × 6 = 9 for every feasible point.) So the minimum is 9. Trap: skipping the half-plane check for an unbounded region, which the marking scheme expects.
Set out Bayes' theorem answers as a clear table of events and probabilities, and prove independence with the product rule.
Practice 12: Machines A, B and C produce 50%, 30% and 20% of a factory's bolts, and 2%, 3% and 5% of their bolts respectively are defective. A bolt chosen at random is found to be defective. Find the probability that it was made by machine C.
Answer: 10/29 (about 0.345). Let D be the event "defective". By total probability, P(D) = 0.5 × 0.02 + 0.3 × 0.03 + 0.2 × 0.05 = 0.010 + 0.009 + 0.010 = 0.029. By Bayes' theorem, P(C | D) = P(C)P(D | C)/P(D) = 0.010/0.029 = 10/29. (P(A | D) is also 10/29, because A makes the most bolts.) Trap: answering with P(D | C) = 0.05, which is the reverse conditional probability.
Practice 13: A fair die is thrown twice. Let E be "the first throw is even" and F be "the sum of the two throws is 7". Are E and F independent? Find P(E ∪ F).
Answer: yes, they are independent; P(E ∪ F) = 7/12. There are 36 equally likely outcomes. P(E) = 18/36 = 1/2. F = {(1, 6), (2, 5), (3, 4), (4, 3), (5, 2), (6, 1)}, so P(F) = 6/36 = 1/6. E ∩ F = {(2, 5), (4, 3), (6, 1)}, so P(E ∩ F) = 3/36 = 1/12. Since P(E)P(F) = 1/2 × 1/6 = 1/12 = P(E ∩ F), E and F are independent. P(E ∪ F) = 1/2 + 1/6 − 1/12 = 7/12.
From our tutors: students often confuse "independent" with "mutually exclusive". Practice 13 is a good test: E and F can happen together, so they are not mutually exclusive, yet they are independent. We ask students to name the property they are using before writing any formula; most wrong probability answers we see come from the wrong rule, not wrong arithmetic.
For Class 12 students in Gurgaon and across Gurugram, the months ahead usually bring school periodic tests and pre-boards (set by each school, often in December or January) before the board paper; the 2027 date sheet had not been published as of 23 October 2026. A steady plan: until the syllabus ends, solve 10–15 questions of each type above after every chapter, from NCERT, the NCERT Exemplar and school worksheets, and log every error. Before pre-boards, do timed mixed sets and one full sitting of the 2026–27 SQP. After pre-boards, re-solve every lost question and work on the weakest units. In the final weeks, take two or three full timed papers a week.
To see how these habits fit into a full scoring plan, read our guide on how to score 95 in CBSE Class 12 Maths. PCM students can use the same "types, not questions" approach in Physics with our Class 12 Physics derivations list, and commerce students taking Mathematics alongside Accountancy will find the matching approach in our CBSE Class 12 Accountancy guide.
Ajay Vatsyayan Classes has 12+ years of home tuition in Gurgaon, 25,000+ students taught and 500+ verified tutors across 50+ Gurgaon schools.
By marks, Calculus is the most important unit at 35 of 80, followed by Vectors and 3D Geometry (14). But CBSE says there is "No chapter wise weightage" and asks for all chapters to be covered, so every chapter can be examined.
We cannot say, and no one honestly can. The question types above are taken from CBSE's 2026–27 sample paper, and the practice questions are our own. They prepare a student for the kinds of question CBSE has described, not for specific questions.
On CBSE Academic's website (cbseacademic.nic.in), on the Class XII sample question paper page for 2026–27, with its marking scheme.
Yes. The NCERT Exemplar Problems for Class XII is one of the books prescribed in CBSE's 2026–27 Maths curriculum, along with the NCERT textbook and lab manual. Use the textbook first, then the Exemplar for harder practice.
There is no official figure. In our experience, 10–15 well-checked questions a day, with every error logged, does more than 40 rushed ones.
Calculus is 35 of the 80 theory marks, but relying on one unit is a risky plan, and we never advise it. CBSE requires at least 33% in each subject, and the smaller units (Relations and Functions, Linear Programming and Probability, 21 marks together) are often the most dependable marks on the paper. Skipping them leaves no margin for error.
Want a Class 12 Maths tutor who works through question types with your child and checks every answer against the marking style? Book a free demo class with Ajay Vatsyayan Classes, Saraswati kunj II, Wazirabad, Sector 52, Gurugram, Haryana 122003. One-to-one at home or online, with male and female tutors available.
Book a Free Maths Demo +91 92204 75088